Food & Beverage Lubrication Solutions for Processing & Packaging Equipment
Morelic supplies food-grade grease and specialty lubricants for bearings, conveyors, chains, valves, O-rings, mixers, filling machines, packaging equipment and washdown environments. OEM formulas, NSF H1 project support, MSDS/TDS and private label packaging are available for B2B buyers.
- Food-Grade Grease Project Support
- Bearings, Chains, Valves & Seals
- Washdown & Temperature Review
- Small-Pack & Private Label Packaging
Food & Beverage Lubricant Product Line for B2B Buyers
Explore our core product families. For conveyor bearings and rollers, Morelic can recommend food grade grease based on speed, load and washdown exposure.
Food-Grade Bearing Grease
Use For:
Conveyor bearings, pillow block bearings, rollers, bushings, mixers and packaging machines.
Key Needs:
- Water resistance
- Corrosion protection
- Load support
Food-Grade Silicone Grease
Use For:
O-rings, rubber seals, valves, gaskets, plastic parts and water-contact components. (silicone grease)
Key Needs:
- Rubber compatibility
- Water resistance
- Low odor
Food-Grade PTFE Grease
Use For:
Sliding parts, plastic gears, light bearings, packaging machine rails. (PTFE grease)
Key Needs:
- Low friction
- Clean appearance
- Plastic compatibility
Food-Grade PFPE Grease
Use For:
High-temperature ovens, aggressive chemical cleaning zones, oxygen-sensitive equipment. (PFPE grease)
Key Needs:
- Thermal stability
- Chemical resistance
- Low volatility
Food-Grade Valve Grease
Use For:
Faucets, beverage valves, water valves, pump seals, dispensing equipment. (valve grease)
Key Needs:
- Water resistance
- Seal compatibility
- Washout resistance
Chain & Conveyor Grease
Use For:
Conveyor chains, rails, slides, bottle washers, canning machines and packaging conveyors.
Key Needs:
- Adhesion / Low drip
- Water resistance
- Cleaning chemical resistance
Match the Grease to the Food Processing Environment
Food and beverage lubrication is not only determined by equipment type, but also by the processing environment and cleaning regimen.
Frequent Washdown
Risk: Water washout, corrosion, grease loss
Formula Direction: Water-resistant food-grade grease, silicone grease or calcium sulfonate direction
Buyer Data Needed: Washdown frequency, water temp, detergent
Steam & High Humidity
Risk: Softening, rust, oxidation, shortened interval
Formula Direction: Steam-resistant or synthetic food-grade grease
Buyer Data Needed: Steam exposure, bearing temp
Sugar, Syrup & Sticky
Risk: Dust attraction, sticking, residue buildup
Formula Direction: Clean food-grade grease with good separation
Buyer Data Needed: Product type, cleaning method
Acidic Fruit Juice / Beverage
Risk: Acid exposure, corrosion, seal damage
Formula Direction: Chemical-resistant food-grade grease or PFPE
Buyer Data Needed: pH range, contact material
Meat, Salt & Fat Exposure
Risk: Salt corrosion, biological contamination risk
Formula Direction: Corrosion-resistant food-grade grease
Buyer Data Needed: Salt exposure, cleaning schedule
Cold or Frozen Processing
Risk: High torque, stiff grease, difficult startup
Formula Direction: Low-temperature synthetic food-grade grease
Buyer Data Needed: Minimum temperature, startup frequency
Need help matching grease to your processing environment?
Food-Grade Lubricant Compliance: H1, H2, H3 and Project Documents
Understanding compliance requirements is critical for food plant safety. Morelic supports documentation according to selected formula and customer requirements.
NSF H1
Meaning: Lubricants for applications where incidental food contact may occur.
Use: Food processing equipment, bearings, chains, seals.
Note: H1 does not mean direct food contact or intentional food contact.
NSF H2
Meaning: Lubricants for equipment areas where there is no possibility of food contact.
Use: Closed systems or non-contact equipment areas.
NSF H3
Meaning: Soluble oils or rust-preventive products.
Use: Hooks, trolleys where edible oil-type products may be required.
3H / Release
Meaning: Special products intended for direct food-contact release applications.
Use: Only when specific product and docs support this use.
Standard Project Documents Checklist
- MSDS / SDS
- TDS (Technical Data Sheet)
- NSF H1 registration support when applicable
- RoHS & REACH compliance
- COA (Certificate of Analysis) if required
- Private label packing specification
Important Note:
Morelic can support NSF H1 food-grade grease projects and documentation according to selected formula and customer requirements. Final compliance should be confirmed by the actual product grade, registration status and documentation.
Food Equipment Lubricant Selection Matrix
A technical decision guide for B2B buyers selecting formulas and packaging.
| Application | Recommended Product Direction | Key Selection Factors | Typical Packaging | Link |
|---|---|---|---|---|
| Conveyor bearings | Food-grade bearing grease | Load, speed, water washdown, corrosion, relubrication interval | 400g cartridge, 1kg can, 15kg pail | View |
| O-rings and rubber seals | Food-grade silicone grease or valve grease | Rubber compatibility, water resistance, smooth assembly, low odor | 5g sachet, 15g syringe, 30g tube | View |
| Beverage valves | Food-grade valve grease | Water contact, torque feel, seal compatibility, washout resistance | 15g syringe, 30g tube, 100g tube | View |
| Packaging machine slides | Food-grade PTFE grease or light synthetic grease | Low friction, clean film, plastic compatibility, speed | 15g syringe, 30g tube, 400g cartridge | View |
| High-temperature ovens | High-temperature food-grade grease or PFPE grease | Temperature, oxidation, hardening, relubrication interval | 400g cartridge, 1kg can, pail | View |
| Food conveyor chains | Food-grade chain grease or adhesive lubricant | Adhesion, low drip, washdown, temperature | Tube, cartridge, pail, drum | View |
| Frozen food equipment | Low-temperature synthetic food-grade grease | Low-temperature torque, pumpability, smooth startup | Cartridge, can, pail | View |
| Maintenance kits | Small-pack food-grade grease | Dosage, label instruction, shelf appearance, MSDS/TDS | Sachet, syringe, mini tube, kit box | View |
Note: Final selection should follow the equipment OEM recommendation, food safety program, actual contact risk, material compatibility and application testing.
OEM & ODM Solution for Your Food & Beverage Projects
Morelic is especially suitable for buyers who need custom food grade grease formula and OEM small package. We handle the filling so you can focus on sales and maintenance.
Formula Customization
Parameter Tuning:
Custom adjustments for Base Oil (Silicone, PAO, white mineral oil, synthetic oil or PFPE), Viscosity, NLGI Grade, and specific performance additives.
Brand Equivalents:
Expert formulation of cost-effective, high-performance alternatives to branded grease.
Specialized Environments:
Engineering for extreme temperatures, heavy loads or high humidity, or other special requested operating conditions.
Packaging & Branding
Flexible Sizes:
1-10g tear pouches, 3-120g squeeze tubes, jars, bottles, pails, and drums.
Private Labeling:
Custom logo pre-printing and private label design for your brand identity.
Retail Ready:
Retail-friendly packaging solutions for hardware, automotive, and plumbing distributors.
From Food Equipment Requirement to Finished Grease Supply
Define Equipment
Bearing, valve, seal, conveyor; contact risk review.
Confirm Conditions
Temp, washdown, steam, acids, speed, load.
Formula Direction
Select bearing, silicone, PTFE, or custom grease.
Sample Check
Equipment test, rubber/plastic compatibility review.
Packaging Design
Private label, instructions, carton label, batch code.
QC & Shipment
MSDS/TDS, filling inspection, export support.
Quality Control for Food & Beverage Lubricant Projects
Trust is built on specific checks. Morelic maintains an internal QC laboratory to support formula consistency and packaging integrity.
Why Partner with Morelic?
- Founded in Shenzhen in 2009
- 8+ Senior R&D Engineers
- Internal QC Laboratory
- OEM/ODM & Private Label
- Small-Pack Filling Expert
- Food-Grade Project Support
Formula & Application Review
- • Appearance and consistency
- • NLGI / penetration direction
- • Oil separation observation
- • Water resistance project review
- • Corrosion protection review
- • Temperature and storage stability review
- • Rubber and plastic compatibility review when required
Food-Industry Documentation
- • MSDS / SDS and TDS
- • NSF H1 project support when applicable
- • RoHS & REACH
- • COA if required
- • Batch information and label support
Packaging Inspection
- • Filling weight accuracy
- • Tube, syringe and sachet sealing
- • Cartridge filling
- • Label position and batch coding
- • Carton packing
Food & Beverage Lubricants FAQ
Common questions from food equipment manufacturers and maintenance teams.
What are food and beverage lubricants?
What does NSF H1 food-grade grease mean?
What grease is used for food processing conveyor bearings?
What grease is suitable for beverage valves and O-rings?
Does Morelic offer private label food-grade grease?
Get Started Your Food & Beverage Lubricant Project
From specialized industrial greases to private label maintenance kits, Morelic develops the perfect formula, packaging, and documentation tailored to your market.
Request Samples or Private Label Quote
Or contact our technical team directly:
